EBT Forum / For all Things Bikes
November 19, 2018, 07:24:09 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Login Register  
Pages: 1 2 3 [4] 5 6 7 8 9   Go Down
  Print  
Author Topic: Photos of 3 x Suzuki TS 250 X 84 on parts For Sale  (Read 15583 times)
0 Members and 1 Guest are viewing this topic.
Mick
Full Throttle
*****
Offline Offline

Gender: Male
Posts: 19581

Founder of EBT Forum, but no longer owner..


« Reply #30 on: December 02, 2009, 08:52:59 PM »

Does anyone know if you can rebore out one of these TS 250X barrels or do you have to resleeve them??

Cheers Mick.
Logged

Your a long time dead, so get out there and enjoy yourself while you still can :-) would loved to have been able to race vintage enduro bikes in Victoria, but sadly that as yet has not happened, so many blokes would have loved to be able to race, owell shit loads of us still have the memory's of racing enduro bikes back in the late 70's and 80's, time to move on to other things I guess :-) but if racing classes for vinduro bikes start then I will dust off my bike and be out there racing my old bike as that is what it was made for ( Racing )
frostype400
Global Moderator
Full Throttle
*****
Offline Offline

Gender: Male
Posts: 2627


pe400 benalla


« Reply #31 on: December 02, 2009, 09:04:17 PM »

I dont see why not depending on what it is at o/s but perhaps it is a special type bore like Leith will know for sure thanks Michael. Smiley
Logged

pe400x2 74gt80a 76rd250cd mt250 wanted tm400 project and suzuki pe parts.
LWC3077
Full Throttle
*****
Offline Offline

Gender: Male
Posts: 2482



WWW
« Reply #32 on: December 02, 2009, 09:31:58 PM »

re-bore, Wossner pistons available up to +2.00mm

http://203.59.136.171/search/index.php?step=5&make=SUZUKI&model=TSX250&year=1986&category=Piston+kit
Logged

WANTED - TS185C   frame.  Between   TS1852-24007  up to TS1852-39022

http://suzukits.informe.com/forum/
http://groups.yahoo.com/group/PEmotorcycles/
frostype400
Global Moderator
Full Throttle
*****
Offline Offline

Gender: Male
Posts: 2627


pe400 benalla


« Reply #33 on: December 02, 2009, 09:33:02 PM »

there you go mick sounds like you are covered thanks Michael. Smiley
Logged

pe400x2 74gt80a 76rd250cd mt250 wanted tm400 project and suzuki pe parts.
Mick
Full Throttle
*****
Offline Offline

Gender: Male
Posts: 19581

Founder of EBT Forum, but no longer owner..


« Reply #34 on: December 02, 2009, 09:33:50 PM »

Ok thanks Leith, would you know what standed bore size is ?? for these please.

Cheers Mick.
Logged

Your a long time dead, so get out there and enjoy yourself while you still can :-) would loved to have been able to race vintage enduro bikes in Victoria, but sadly that as yet has not happened, so many blokes would have loved to be able to race, owell shit loads of us still have the memory's of racing enduro bikes back in the late 70's and 80's, time to move on to other things I guess :-) but if racing classes for vinduro bikes start then I will dust off my bike and be out there racing my old bike as that is what it was made for ( Racing )
LWC3077
Full Throttle
*****
Offline Offline

Gender: Male
Posts: 2482



WWW
« Reply #35 on: December 02, 2009, 09:36:58 PM »

Standard is 70mm

http://www.woessner-kolben.de/english/indexenglish.html

These are better than Wisecos too. Wink

Dont know if you have the power valve model or not but i reckon pistons would be the same as non power valve i reckon.
Logged

WANTED - TS185C   frame.  Between   TS1852-24007  up to TS1852-39022

http://suzukits.informe.com/forum/
http://groups.yahoo.com/group/PEmotorcycles/
Mick
Full Throttle
*****
Offline Offline

Gender: Male
Posts: 19581

Founder of EBT Forum, but no longer owner..


« Reply #36 on: December 02, 2009, 09:44:12 PM »

Both Barrels have power valve I think the motors are 87model

M.
Logged

Your a long time dead, so get out there and enjoy yourself while you still can :-) would loved to have been able to race vintage enduro bikes in Victoria, but sadly that as yet has not happened, so many blokes would have loved to be able to race, owell shit loads of us still have the memory's of racing enduro bikes back in the late 70's and 80's, time to move on to other things I guess :-) but if racing classes for vinduro bikes start then I will dust off my bike and be out there racing my old bike as that is what it was made for ( Racing )
LWC3077
Full Throttle
*****
Offline Offline

Gender: Male
Posts: 2482



WWW
« Reply #37 on: December 02, 2009, 09:52:18 PM »

Ok thats good then, as i noticed the Piston listing says 86 onwards but dont know why. I think only 84 and maybe 85 had no power valve, or it might have been only the 84 model that had no power valve, i cant remember exactly.
Logged

WANTED - TS185C   frame.  Between   TS1852-24007  up to TS1852-39022

http://suzukits.informe.com/forum/
http://groups.yahoo.com/group/PEmotorcycles/
Mick
Full Throttle
*****
Offline Offline

Gender: Male
Posts: 19581

Founder of EBT Forum, but no longer owner..


« Reply #38 on: December 02, 2009, 09:53:16 PM »

I have also been told the the forks-wheel and drum brake on the rolling TS 250X are RM 250 36mm,,,,what do you all think about that one Yes or No.

Cheers Mick.
Logged

Your a long time dead, so get out there and enjoy yourself while you still can :-) would loved to have been able to race vintage enduro bikes in Victoria, but sadly that as yet has not happened, so many blokes would have loved to be able to race, owell shit loads of us still have the memory's of racing enduro bikes back in the late 70's and 80's, time to move on to other things I guess :-) but if racing classes for vinduro bikes start then I will dust off my bike and be out there racing my old bike as that is what it was made for ( Racing )
frostype400
Global Moderator
Full Throttle
*****
Offline Offline

Gender: Male
Posts: 2627


pe400 benalla


« Reply #39 on: December 03, 2009, 08:09:45 AM »

I think maybe forks but I cant remember I thought that rm was mainly 38mm unless they are early
Logged

pe400x2 74gt80a 76rd250cd mt250 wanted tm400 project and suzuki pe parts.
Pages: 1 2 3 [4] 5 6 7 8 9   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.15 | SMF © 2006-2011, Simple Machines Valid XHTML 1.0! Valid CSS!