EBT Forum / For all Things Bikes
December 12, 2018, 09:00:15 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Login Register  
Pages: 1 [2] 3 4 5 6 7 8 9   Go Down
  Print  
Author Topic: Photos of 3 x Suzuki TS 250 X 84 on parts For Sale  (Read 16515 times)
0 Members and 2 Guests are viewing this topic.
Mick
Full Throttle
*****
Offline Offline

Gender: Male
Posts: 19581

Founder of EBT Forum, but no longer owner..


« Reply #10 on: December 01, 2009, 07:36:30 PM »

Leith you are spot on mate the 2 other sets of forks are 38mm but the ones on the bike are 36mm, well I am only using a ruler but I think I am right.

Poppy I think the other TS's in the lot of 3 and 5 motors went for about $130.00

Frosty I hope I sell some stuff as I have bugger all room to put all this as the bloke chucked in wheels that I have no idea what they all come off, it makes it hard to sell something if you have no idea what it is, so any help on IDing things here would be great fella's  Smiley

Cheers Mick.
Logged

Your a long time dead, so get out there and enjoy yourself while you still can :-) would loved to have been able to race vintage enduro bikes in Victoria, but sadly that as yet has not happened, so many blokes would have loved to be able to race, owell shit loads of us still have the memory's of racing enduro bikes back in the late 70's and 80's, time to move on to other things I guess :-) but if racing classes for vinduro bikes start then I will dust off my bike and be out there racing my old bike as that is what it was made for ( Racing )
LWC3077
Full Throttle
*****
Offline Offline

Gender: Male
Posts: 2482



WWW
« Reply #11 on: December 01, 2009, 07:40:20 PM »

Was all this on ebay? If so i cant believe i missed it and wish it was local.
Logged

WANTED - TS185C   frame.  Between   TS1852-24007  up to TS1852-39022

http://suzukits.informe.com/forum/
http://groups.yahoo.com/group/PEmotorcycles/
Mick
Full Throttle
*****
Offline Offline

Gender: Male
Posts: 19581

Founder of EBT Forum, but no longer owner..


« Reply #12 on: December 01, 2009, 07:57:51 PM »

Yes it was all on ebay Leith but under a diff name as in not under Suzuki TS 250x more like ( Bike Lot ) I knew about it because he told me he was going to sell everything he had so I kept a eye out through his items for sale now, If I told him before he put it all on ebay that I wanted it he would have sold the lot to me when I brought the DT 175 off him some weeks back, but I never ask because I thought he would want plenty for it all, he had PE, IT, TS, RM, CR stuff and loads of it to, his shed was full of goodies and it all had to go which it did for not many hundreds of $$$$ for the lot,,,,and he has nothing left now except AG bikes.

Mick.
Logged

Your a long time dead, so get out there and enjoy yourself while you still can :-) would loved to have been able to race vintage enduro bikes in Victoria, but sadly that as yet has not happened, so many blokes would have loved to be able to race, owell shit loads of us still have the memory's of racing enduro bikes back in the late 70's and 80's, time to move on to other things I guess :-) but if racing classes for vinduro bikes start then I will dust off my bike and be out there racing my old bike as that is what it was made for ( Racing )
frostype400
Global Moderator
Full Throttle
*****
Offline Offline

Gender: Male
Posts: 2627


pe400 benalla


« Reply #13 on: December 01, 2009, 08:28:16 PM »

if any of the forks have disc caliper mounts just give me some lengths etc etc they may be perfect for what I need all the wheels are hard to id the second last wheel looks very yamaha early style though similar to my gt80 bar the lug for the fork is bigger suggesting the actual bike may be bigger or it may be DT or AG or something alike becuase it has the speedo drive and is verly similar to some I have seen. Also you must have a disc front end setup going by the front fork disc protector let me know if you have a disc front end I would be keen to buy one that is exactly what another friend is using going by some of the t/trees in the photo thanks alot Michael. Smiley
Logged

pe400x2 74gt80a 76rd250cd mt250 wanted tm400 project and suzuki pe parts.
LWC3077
Full Throttle
*****
Offline Offline

Gender: Male
Posts: 2482



WWW
« Reply #14 on: December 01, 2009, 08:40:13 PM »

Frosty the TS250 has 38mm forks, the later early 90's TS200 has 41mm. Im told the the TS250 has less travel/shorter fork legs that the T/X/Z PE so it will pay to get Mick to measure total length of the TS forks from the axle to the end of the chrome leg just where it meets the cap. if they are long enough, The whole lot should bolt on pretty easily, but i would use 79/80 Rm triples or 38mm 82-84 PE175 triples, if they are the same width as the TS250 triples. The stem length may be different length on the TS so it would be easier to use 38mm PE/RM triples i reckon.
Logged

WANTED - TS185C   frame.  Between   TS1852-24007  up to TS1852-39022

http://suzukits.informe.com/forum/
http://groups.yahoo.com/group/PEmotorcycles/
frostype400
Global Moderator
Full Throttle
*****
Offline Offline

Gender: Male
Posts: 2627


pe400 benalla


« Reply #15 on: December 01, 2009, 08:47:41 PM »

yes but Quicky was using ts200 and the ts200 trees with no trouble I think he said the were either 38 or 41 I think 38 I only need a few measurements to tell thanks Michael. Smiley
Logged

pe400x2 74gt80a 76rd250cd mt250 wanted tm400 project and suzuki pe parts.
Mick
Full Throttle
*****
Offline Offline

Gender: Male
Posts: 19581

Founder of EBT Forum, but no longer owner..


« Reply #16 on: December 01, 2009, 08:58:03 PM »

The TS 250X forks I have are 38mm wide 870-5mm middle of axel to top of fork and the ones I have on the rolling bike are 930mm long and 36mm wide.

Cheers Mick.
Logged

Your a long time dead, so get out there and enjoy yourself while you still can :-) would loved to have been able to race vintage enduro bikes in Victoria, but sadly that as yet has not happened, so many blokes would have loved to be able to race, owell shit loads of us still have the memory's of racing enduro bikes back in the late 70's and 80's, time to move on to other things I guess :-) but if racing classes for vinduro bikes start then I will dust off my bike and be out there racing my old bike as that is what it was made for ( Racing )
LWC3077
Full Throttle
*****
Offline Offline

Gender: Male
Posts: 2482



WWW
« Reply #17 on: December 01, 2009, 09:03:38 PM »

Yes but you will struggle to find TS200 triple clamps. Im am the one who worked out that he had 41mm TS200 forks/triples on his bike when he couldnt work out what they were. So if the 38mm TS 250 triples are not a straight bolt on fit i was suggesting going for 38mm RM/PE triples with TS250 forks if the RM/PE triples are wide enough to accept the TS disc wheel which they should be as they are a pretty standard width.
Logged

WANTED - TS185C   frame.  Between   TS1852-24007  up to TS1852-39022

http://suzukits.informe.com/forum/
http://groups.yahoo.com/group/PEmotorcycles/
frostype400
Global Moderator
Full Throttle
*****
Offline Offline

Gender: Male
Posts: 2627


pe400 benalla


« Reply #18 on: December 01, 2009, 09:05:39 PM »

930 sound good but but 870 is what I measured off my pe400 when it is sitting there that is axle to top I got I think 900 on the pair that were in the roof but they werent under load and extended fully I can probably get away with 870 if they have a disc mount? because the 36mm ones wont have disc will they? thanks alot Michael. Smiley
Logged

pe400x2 74gt80a 76rd250cd mt250 wanted tm400 project and suzuki pe parts.
frostype400
Global Moderator
Full Throttle
*****
Offline Offline

Gender: Male
Posts: 2627


pe400 benalla


« Reply #19 on: December 01, 2009, 09:07:14 PM »

Thanks Leith I am sure they will some one told me I cant remember maybe a couple of guys that I may be able to bore standard pe 36 to 38 but larger is a strecth
Logged

pe400x2 74gt80a 76rd250cd mt250 wanted tm400 project and suzuki pe parts.
Pages: 1 [2] 3 4 5 6 7 8 9   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.15 | SMF © 2006-2011, Simple Machines Valid XHTML 1.0! Valid CSS!