EBT Forum / For all Things Bikes
June 17, 2019, 12:43:17 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: Kawasaki KLR 650 Gen2 Wheel Bearing Sizes.  (Read 2333 times)
0 Members and 1 Guest are viewing this topic.
Mick
Full Throttle
*****
Offline Offline

Gender: Male
Posts: 19581

Founder of EBT Forum, but no longer owner..


« on: August 27, 2015, 06:40:10 PM »



I got this info off KLR650.net forum.

Frt Right: ........6202 35x15 ........brand=SFK.. 6202 2RS JEM rubber seals
Frt Left: .........6203 40x17.........brand=SFK.. 6203 2RS JEM rubber seals
Right Rear: ......6204 47x20.........brand=SFK.. 6204 2RS JEM rubber seals
Left Rear: .......6003 35x17..........brand=FAG.. 6003 2RSR C3 rubber seals
Rear Sprocket: 6004 42x20..........brand=SFK.. 6004 2RS JEM rubber seals
The FAG brand left rear is because they did not have a SFK in stock.
Logged

Your a long time dead, so get out there and enjoy yourself while you still can :-) would loved to have been able to race vintage enduro bikes in Victoria, but sadly that as yet has not happened, so many blokes would have loved to be able to race, owell shit loads of us still have the memory's of racing enduro bikes back in the late 70's and 80's, time to move on to other things I guess :-) but if racing classes for vinduro bikes start then I will dust off my bike and be out there racing my old bike as that is what it was made for ( Racing )
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.15 | SMF © 2006-2011, Simple Machines Valid XHTML 1.0! Valid CSS!